Fish Tank Pump

Instructions For Making Aquarium Vodushnogo Pump

August 2, 2019

Instructions For Making Aquarium Vodushnogo Pump

A water pump is a necessary item in an aquarium. It fills water with oxygen, without which neither fish, nor plants, or other hydrobionts can exist. This device is not so expensive, but it can be done by yourself. How to make an air pump for an aquarium quickly with your own hands?

Materials and tools

Battery powered with cooler

Video "Air Pump for Aquarium"

Comments and Reviews

Materials and tools

To make an aquarium inlet pump with your own hands, you will need tools at hand. The principle of operation of a water pump in an aquarium is simple: it accumulates air in it, and then feeds it into the pond. Based on this, it is very easy to navigate what kind of materials and tools you may need for self-production.

Instructions For Making Aquarium Vodushnogo Pump

Materials for creating an air pump air:

  • capacity for air (a balloon or a chamber from a ball, bicycle wheel);
  • small electric motor;
  • any pump pear;
  • dropper tube;
  • eccentric;
  • dropper clamp;
  • tee for connecting tubes;
  • clamps.

Instrument creation tools:

This is not all possible items that may be needed for a homemade device. Note that the quantity of materials required often depends on the type of product. Therefore, to get started, read the different instructions.

Manufacturing instruction

How to make an air pump for the aquarium with your own hands? In fact, this task will cope any. The easiest way to create it is based on a pear or a camera.

Simple option

To create this design, take the air tank, for example, the camera from the wheel, tubes and clamps from droppers, pump and tee.

  1. Cut the tube from the dropper into three pieces. Make one of them a little longer – it will be lowered into the container.
  2. In a long section, with a cigarette lighter, solder the edge and make a lot of holes at its tip with a needle. To prevent the duct from floating up, tie a small weight on its tip. Put the clip on the same piece.
  3. Connect all three segments of the tube with a tee, fasten them with clamps.
  4. Attach a pear or a pump to one of the two segments, and an air tank to the other. Caution: on the hose that goes to the pear, also secure the clip from the dropper.
  5. Pump air through the pump into the air tank, shut off the inlet flow. A long hose with holes drop into the aquarium and open the output stream with a clip from the dropper.
Read more:  When You Can Run The Fish In A New Aquarium

Instructions For Making Aquarium Vodushnogo Pump

Your device for the supply of air in the reservoir is ready. You can adjust the flow with the help of a clip from the dropper. It is necessary to pump a couple of times a day – it all depends on the size of the air tank.

Battery powered with cooler

  1. Take a small plastic bottle, an electric motor, a cooler, a dropper tube, glue. You will also need wires, batteries and a jack for them, the power button. Cut the bottle in two halves.
  2. Using a soldering iron, attach the wires to the motor, and attach the cooler to it. The resulting device is secured with superglue inside the bottle.
  3. Attach a tube with a sealed end and a lot of small holes in the bottom to the neck of the bottle.
  4. Attach a button and a battery socket to the wires and close the half of the bottle with the second part of it.

Instructions For Making Aquarium Vodushnogo Pump

The device made in this way will help out not only on the road. He will help a lot when turning off the lights in the house.

12 volts

When self-creation based on the electric motor, it is desirable to use a 12 volt motor. Then in case the lights are turned off in the house, you can even connect it to the car battery. Under normal conditions, it works from the electrical network using a power supply.

Instructions For Making Aquarium Vodushnogo Pump

Attach an ordinary eccentric to the motor shaft, attach a pump to it – for example, a syringe or an improvised device. The shaft will move the piston, and it will pump air.

Read more:  Aquarium Inlet Pumps

Silent

Homemade air pump for the aquarium can be quiet. To do this, the usual fixture just need to hang inside the jar. To do this, make three holes in the lid: one for the duct, the second for the wire, and the third for the hook on which you hang it. Assemble the design and use on health.

Instructions For Making Aquarium Vodushnogo Pump

In fact, a completely silent water pump is a legend. But this method will significantly reduce the volume of this device.

Sorry, there are currently no polls available.

Video "Air Pump for Aquarium"

You will learn how to make a water pump for fish from an aluminum can simply by watching this video.