Fish Tank Pump

How To Soundproof Aquarium Inlet Pump

July 30, 2019

Each aquarist is aware of a small but irreplaceable aquarium device, which, under low pressure, forces air into the thickness of aquarium water. Air bubbles, rising to the surface create a slight boiling, oxygen from the air actively saturates your body of water. This burbulyator is called a water pump or aerator. Aer – Latin for air.

Water pumps for the aquarium are of several types. The most common and long known piston and membrane. Not so long ago, aPUMP type piezo-water pumps appeared on the market. In addition, the problem of water saturation with oxygen can be solved by ordinary aquarium pumps or aero-lift filters.
With all the diversity, the main drawback of all types of aquarium water pumps is the noise they make. If your aquarium is in a room where someone is sleeping, the noiselessness of the water pump is one of its most important qualities. Unfortunately, there are no silent water pumps – the principle of their work is based on vibration.
One of the noisiest water pumps is considered membrane. However, the membrane water pump will save you some energy costs, it has a long service life, it almost never breaks. In addition, it is more effective. Therefore, such an aerator can be connected to several aquariums at once.
The generally recognized leader among silent water pumps are piston water pumps. Recently, competition with piston aerators, in terms of the noise produced, was piezo-air pumps. However, they also have a drawback – they are thin and do not put in a tank over 200 liters.
When the tank capacity is large enough – from 150 liters or more, some aquarists install two or more aerators into it. In this case, you can choose vodushnye pumps of different principles of work – piston or piezo and diaphragm. The first can be included at night, the second – in the daytime.
There is another little trick. To quench the vibration that creates noise, you can put a flat rubber or foam pad, for example, from a computer mouse or a fragment of an old yogamat, under the water pump. Sometimes aquarists take the water pump to another room, and connect it to the aquarium with a long pipe – an air duct. This method is not considered effective. Can you imagine what power a water pump should have to “push” air over a long distance?

Another device that effectively solves the problem of water saturation in an aquarium with oxygen is the h3Show BubbleMaker aerator – this device is installed inside the aquarium and works according to the Venturi principle by “sucking” the air through a tube creating a powerful whirlwind of small bubbles using a rotor, while the water pump not needed.

Aquarium pump, which is the basis of all modern internal filters for aquariums, is also often used to saturate water with oxygen. An additional function is provided by a small device that allows you to “suck in” air from the surface and enthrall it after the movement of water. In addition, the pump helps to coordinate the flow of aerated, oxygen-rich water, which is also a major element of biological filtration. If you have a large aquarium, from 150 liters or more, it is advisable to purchase a pump that will help ensure good circulation of water, thus contributing to the well-being of all inhabitants of the aquarium. The tube for air leaks from the surface also makes a specific noise – a light whistle, which can annoy people with sensitive sleep. However, this problem was learned to solve. In modern pumps, tubes are equipped with a small cap. By changing the position of the stub, you can get rid of obsessive noise, or at least significantly reduce it.
The latest in a series of devices that enrich water with oxygen, you can put airlift filters. Actually, this is a design that provides additional capabilities to any of the above listed water pumps. Air is aerated into a device equipped with porous materials (sponges, zeolites, etc.). Bubbles of air escaping to the surface create cravings that entrain aquarium water behind them into the filter elements. Airlift filters produce a constant murmur. By experience, almost no one has managed to reduce the noise of airlift filters.

If you are not satisfied with the quality of branded air pump for the aquarium, you can do it yourself. However, such a device will work well only if you have the skills to create such mechanisms. Self-made water pumps can cause a short circuit in the water, which is very dangerous for life. Waterproofing in this case – a very necessary part of the aerator. Well, the design of self-made devices, as a rule, leaves much to be desired.

Obviously, each of us wants to choose good, high-quality equipment that would meet our needs and requirements. This article will focus on aquarium water pumps. The fundamental requirement of any aquarist to the water pump is its silent operation. Based on our own experience and collected opinion of our members of the forum, We decided to make the TOP-best air pump for the aquarium. The purpose of this rating is to publish the opinion of aquarists who, in practice, have experienced various aquarium inlet pumps. We will evaluate the noise of the device itself, the noise from the puzkov is not considered.

In the ranking of the best hit the following water pumps:

Schego Optimal water pump

aPump water pump

Prime water pump

Aerator h3Show (Hydor) Bubble maker – review material here.

water pump Ehmein

So, here is our topic.

5th place: Eheim 100/200/400

How To Soundproof Aquarium Inlet Pump

Description: a modern device that will allow you to saturate aquarium water with vital oxygen. Suitable for both marine and freshwater aquariums. Due to its compact size, such a water pump does not take up much space, and its convenient form of attachment will allow you to install in any place. The amount of air flow is simply adjusted by means of a switch that is located on the front panel of the device. It works almost silently.

4th place: Schego Optimal

How To Soundproof Aquarium Inlet Pump

Description: Schego Optimal water pump is one of the most popular among aquarists. Suitable for aquariums from 50 to 300 liters, capacity up to 250 l / h with a power of 5 watts. Air flow can be adjusted. Low vibration makes the water pump almost silent. If desired, and the presence of a splitter, it can be connected directly to several aquariums. The device has legs to increase stability, and if necessary it is suspended vertically. The pre-filter is easy to change, the long-life membrane ensures a long life of the aerator.

3rd place: PRIME

How To Soundproof Aquarium Inlet Pump

Description: The piezo-air pump PR-4113 for aquariums up to 200l is currently the smallest and most silent in the world. The air flow pressure created by the vodshny pump PR-4113 allows it to be used for aquariums with a height of water column up to 100 cm.

2nd place: aPump

How To Soundproof Aquarium Inlet Pump

COLLAR water pumps are ideal for smaller aquariums.

1st place: h3Show (Hydor) Bubble maker

How To Soundproof Aquarium Inlet Pump

h3Show BubbleMaker – underwater aerator, which creates a powerful whirlwind of small bubbles, while the water pump is not needed. The aerator itself is located inside the aquarium, only the power supply cable and the air hose that can be inside the aquarium are outside – the main thing is that its tip is out of the water. Of course, if there is such a device in an aquarium, you will not need a water pump anymore.
Why Bubblemaker we put in the first place? As can be seen from the description – this is not quite a standard water pump, as listed above. Eheim, Prime, Schego, aPump – they are all installed outside the aquarium. BubbleMaker is installed inside the aquarium – under water. Due to this, water absorbs any noise produced by the device. And since we estimate the noise level of the water pump, BubbleMaker becomes the clear leader. He just can not hear.
Note that BubbleMaker has an aeration tube from which a murmuring sound can be heard. However, with the help of a cap at the exit of the tube, this noise can be leveled, while the bubbles will become even more fine, which is very good. By the way, this property of BubbleMaker is used by some aquarists for supplying CO2, it turns out a reactor that produces bubble dust, which is very important when carbon dioxide is supplied.

The only nuance of this device is that the working depth recommended by the manufacturer is no more than 45 cm, although in practice there are examples of successful operation of this device even when installed at a depth of 55 cm.

Read more:  Why Do You Need An Air Pump In The Aquarium

This is our review. Of course, how many people have so many opinions, so read the links given above, discuss, suggest your own options – this will only benefit the entire aquarium community.

Overview of the silent and quiet air pump for the aquarium.

We tested the most popular models.

The aquarism forums have a firmly rooted opinion that a completely silent air pump for an aquarium is an impossible dream. The opinion is fair enough, since this disadvantage is the result of the principle of operation of the water pump, in which air is driven by the vibration of the membrane, and any vibration is the source of noise.

Many aquarists made their own air-powered water pumps, which worked on a completely different principle than the modern ones on the market. As the main element, a syringe was used, the piston of which with a drilled hole, fitted with a thin elastics as a valve, was connected to an electric motor by means of a connecting rod and pumped air into the aquarium. Such a device produced a certain noise – the sound of an electric motor and the sound of bursting bubbles. If an electric motor from a sound player was used as a motor, the device turned out to be almost noiseless.

To date, almost all manufacturers offer aquarium inlet pumps of membrane type, the noise of which depends on the vibration of the membranes and the electric heater drive. The concept of noise is individual – someone sleeps quietly under the tarahtenie old refrigerator, and someone wakes purring cats. Therefore, for objectivity, the level of noise produced by aquarium water pumps from different manufacturers was measured using the Smart Sound Leveling HQ smartphone application, which was chosen because it was designed to measure low-noise sound from 0 to 140 dB, while the precision sound level meters measure noise level from 10 dB (for example, Robotron 0002). Sound meter "Sound meter HQ", installed on the Samsung Galaxy S6, was able to measure even the noise of human breathing.


The leader of the test was still a little popular, but already sold in a Collar water pump – aPUMP. Aquarists rightly noted on the forums, this aquarium inlet pump is so silent that it is almost unheard of. Measurements have shown that the noise level is much different from that declared by the manufacturer to less than 35 dB, although to a much better side – only 7 dB. Note that 2 dB is the permissible noise level in the soundproofed recording room, and 5 dB is the noise level in a muffled room. The device is designed for use in aquariums up to 200 liters and is indeed currently the smallest and most silent water pump in the world. At the same time, the airflow pressure created by the aPUMP pump allows it to be used for high aquariums with a height of water column up to 80 cm! The use of the patented technology has made it possible to achieve an all-time low noise level – in an aquarium, the height of the water column 50 cm is less than 10 dB.


When creating air pumps of the Eheim AIR PUMP range, the designers concentrated on the node providing air movement — a special rubber was used for the membrane, on which magnets were installed, which made it possible to dispense with such a noise source as the armature movement. The campaign paid much attention to the hull design – noise-suppressing technologies were applied. The method of positioning the water pump also contributes to reducing the noise level – it is suspended in a vertical position and the vibration is not transmitted to such resonating surfaces as, for example, the table top. The enclosed diffuser for air spraying allows you to adjust the size and flow of bubbles, so that this source of noise from the bubbles bursting on the surface. The measurements showed a noise level in the range from 18 to 21 dB, depending on the power of the water pump, which corresponds to the noise level that creates a quiet whisper at a distance of 1.5 meters.


One of the quietest filter aerators offered on today’s market for aquarium water pumps and which you, like all the models mentioned here, you can buy from – is released by the JBL campaign – these are the JBL ProSilent line of air pumps that fully meet the need for aeration or mechanical water purification using airlift filters in aquariums of various volumes – from 40 to 600 liters. The measurements showed a noise level of 20 dB for the smallest JBL ProSilent a100 water pumps (from 40 liters to 150) and 30 dB for the most powerful JBL ProSilent a400 (up to 600 liters), which corresponds to the permissible level of extraneous noise in recording studios. The manufacturer notes that over time, the noisiness of the water pump may increase due to clogging of the pores of the spray gun with lime deposits and due to the fact that the air-filter pad placed in the lower part of the body becomes clogged with dust, and the air pump has to work in a super-standard mode. It is easy to get rid of this noise simply by replacing or clearing the gasket and sprayer.


The same level of noise with JBL ProSilent, showed water pumps company Sicce. The special design in which the legs of the water pump are made completely damps the vibrations that occur in the apparatus, therefore, when placed in a horizontal plane on a solid surface, resonant noises do not arise. It is also possible to hang the water pump in a vertical position, which further reduces noise.

At aquaMole, you can purchase a quiet AIRlight aquarium water pump:

– Sicce AIRlight 1000 for artificial reservoirs up to 180 liters;

– Sicce AIRlight 1500 for high-quality aeration of aquariums up to 100 liters;

– Sicce AIRlight 3300 – for aquariums up to 180 liters, there is an electronic power control and two air outlets made of stainless steel.


A little higher is the noise generation in the air pumps of the models of the line APS of the famous German campaign Tetra. In the course of design development, engineers took into account all the shortcomings of the previous series of models and supplied the new devices with special noise-absorbing chambers, the case was made of a denser material and installed unique to date membranes of super elastic rubber. All this allowed us to create a quiet air pump for the aquarium.

The smallest Tetra APS-50 air pump in the range, designed for aeration of aquariums from 10 to 60 liters, produces noise at a level of 25-26 dB, which corresponds to the noise allowed in recording studios. Somewhat noisier Tetra APS-400, designed to aerate aquariums up to 600 liters. The noise level is 35-37 dB, which corresponds to the noise of quiet rustles in a large audience.

On the forums of aquarists, you can find complaints that the Tetra air pumps of the previous series are quite hot during operation. In the new vodushnogo pumps, this disadvantage is completely eliminated, which, together with the ultra-modern excellent design that is unusual for vodoshnyh pumps, makes them a desirable acquisition.


Aquael campaign air pumps of OXYBOOST and OXYPRO lines. Previous models of water pumps of this company often aroused complaints of aquarists about their noise, but they put up with it because of the high performance of the devices. In new models, the noise was reduced due to the design features (double walls and noise absorbing materials), the use of more elastic rubber as a blower and a unique magnet design. Today, these water pumps are a good combination of high performance and low noise. The Aquael OXYPRO 150 water pump, for example, at 35 dB noise level can pump air at a depth of 2 meters. Naturally, aquariums of such depth are quite rare, so the water pump does not work at full rated capacity, which further reduces its noise.


The low level of noise was shown by the 35-dB Ferplast campaign’s AIRFIZZ line pumps when fully loaded, and the placement in the vertical position reduced the noise level to 32 dB.


Of great interest are air pumps of the German campaign Schego. Formed on the basis of the Schemel campaign known since 1949 & Goetz GmbH & Co KG, this company has proposed a line of models of water pumps that strike with their unpretentious appearance – a simple rectangular transparent case that makes visible all the internal stuffing of the device and gives the impression of creating a homebrew master. The more pleasant were the results of testing – these powerful water pumps, designed to aerate aquariums from 100 to 300 liters, turned out to be quieter than Tetra’s design products. The legs on which the air pumps are installed are rather small – however, the special material from which they are made is enough to completely quench the vibrations. The noise of the most low-power SHEGO PRIMA 100 water pump, designed for aquariums up to 100 liters 30 dB, and the most powerful, for aquariums of 300 liters SHEGO M2K3 is 37-40 dB, which also does not exceed the permissible level of extraneous noise in recording studios.

Read more:  How To Install A Water Pump In The Aquarium


The same noise was shown by the water pumps Mistral 300 and Mistral 200 from Aquamedic. The massive body of cast aluminum, specially selected rubber for the legs dampens vibrations and, as a result, the noise of these powerful (300 and 200 liters per hour) aquarium membrane vodushnyh pumps. The level was only 38 dB for the more powerful Mistral 300.


Quite low-noise and models of water pumps Fluval Q2 of the company Hagen, which manufactures devices designed for the aeration of aquariums from 40 to 600 liters. The smallest water pumps emit noise at 35 dB, and the most powerful, for aquariums, 600 liters Fluval Q2 up to 45 dB, which correspond to the noise of the night street when there is no movement on it. Such quiet work with a steady constancy of the air flow, the designers managed to achieve through the use of multi-chamber and double walls with special partitions.


The Atman EP water pumps turned out to be more noisy – almost 40 dB, which corresponds to the noise level of a quiet muffled conversation, although this is exactly the noise level set as a sanitary standard in rooms from 23.00 to 7.00 hours.


The Chinese Minjiang NS 44-45 dB water pumps turned out to be even more noisy, and this is the noise level of a quiet conversation, although, if we take into account that these are quite powerful water pumps, for example, the Minjiang NS 7200 model, shaking 500 liters of air per hour, and quite inexpensive (on average 18-20 dollars), for someone such a choice will seem optimal. In favor of acquiring such a water pump and the fact that it runs on batteries and your fish will not be afraid of emergency or planned power outages.


Choosing a silent air pump for the aquarium: a review of popular models

an aquarium inlet pump is necessary when maintaining any artificial household pond. It fills the water with oxygen, which is required for the life activity of aquarium inhabitants and plants. But the trouble with many water pumps is that during direct operation they make a lot of noise. During the day, the monotonous sound is imperceptible, but at night it just drives many crazy. Trying to solve this problem, manufacturers of aquarium equipment have developed special models that are silent in operation. But how to choose the aerator from the many proposed?

Types of water pumps and the best models

By design, all aquarium inlet pumps can be divided into two types:

The essence of the work of the first type is that the generated air comes out under the action of the piston. These models differ in high performance and long service life. Because of their high power, they are recommended to be installed to enrich the air in large aquariums.

Membrane water pumps deliver air flow through special diaphragms. Such aerators differ in low power and low energy consumption. But this can also be attributed to the disadvantages, since they are unsuitable for enrichment in large aquariums, with a maximum volume of 150 liters.

But both of these types of aerators are united by the fact that they produce noise during operation, which is very uncomfortable. But on the basis of such a construct, water pumps were developed silent in the aquarium.

Consider the most reliable and popular manufacturers and their best models of such aquarium equipment.

Aerators for small aquariums

water pumps from Aqvel

This company has been on the market for over 33 years. And it is deserved among the top five manufacturers of aquarium equipment. And its model OxyBoots AP – 100 plus is considered the best air aerator for small aquariums at an affordable price. Specifications:

  • volume of enriched water – 100 l / h;
  • designed for aquariums from 10 to 100 liters;
  • power consumption – 2.5 W;
  • small sizes;
  • rubber feet smoothing out working vibration.

How To Soundproof Aquarium Inlet Pump

The downside of the models under consideration is the absence of a flow regulator. But such a defect is not critical for use in small aquariums.

Polish domestic technology from DoFhin

Since 2008, this Polish company has opened its production in Russia. This suggests that its products are popular with us for its quality and durability. A striking example of this statement is the silent air pump for the model aquarium AP1301. Its characteristics:

  • power consumption – 1.8 W;
  • it is applied in capacities from 5 to 125 liters;
  • quiet operation, almost silent;
  • productivity – 96 l / hour.

How To Soundproof Aquarium Inlet Pump

But the disadvantages include its lack of equipment. Namely, the sprayer, check valve and hose to the aquarium must be purchased separately, which entails additional expenses.

water pumping device from Sicce

Their characteristics also distinguished water pumps from the AIRlight range as the best low-power, noiseless equipment for aquariums. All models from AIRlight have a unique improved design that produces virtually no vibrations. It is supplemented with legs that completely absorb it. Interestingly, when placed in a vertical position, all noises disappear.

How To Soundproof Aquarium Inlet Pump

All models have electronic performance tuning. You can also connect your device to several aquariums at the same time. But this is possible only if their total volume does not exceed the maximum allowed for each, namely:

  • AIRlight 3300 – up to 180 liters;
  • AIRlight 1800 – up to 150 liters;
  • AIRlight 1000 – up to 100 liters.

Aerators for large aquariums

Schego water pumping device

Schego is another popular company in its field that produces a wide range of high quality aquarium equipment. The best model for a large displacement aquarium is Optima. This is fully confirmed by its characteristics:

  • developed aquarium inlet pump for volumes – from 50 to 300 liters;
  • power consumption – 5 W;
  • there is an air flow regulator;
  • the ability to connect to multiple aquariums;
  • can be hung vertically;
  • productivity – 250 l / hour;
  • the device is equipped with stable legs that absorb vibrations;
  • easy filter change;
  • high-quality membrane.

How To Soundproof Aquarium Inlet Pump

As for the shortcomings, there are no such ones in terms of design. But they can be attributed considerable cost. However, if we compare it with the quality characteristics and capabilities of the aerator for the aquarium, the price is quite reasonable.

Aerator from Collar

The undisputed leader in the category of the most silent and compact water pumps is the aPUMP model. A considered model has been developed with the following characteristics:

  • productivity – 200 l / hour;
  • the height of the column of produced air is up to 80 cm, which makes it possible to use it in high aquariums and aquarium columns;
  • noise level – up to 10 dB, this value shows that it is inaudible even in a quiet room;
  • built-in system of regulation of the air flow;
  • it is possible to replace the filter without additional tools and consult a specialist.

How To Soundproof Aquarium Inlet Pump

The only negative point is its price, but in some cases there is simply no better alternative to such aquarium equipment.

water pump from Eheim

One of the favorite brands among aquarists, who prefer quality and reliability, is undoubtedly this German company. Despite the fact that Eheim specializes in the development and production of advanced filters, their aerators are enviable in popularity. Especially the Air Pump 400 model. Its characteristics are:

  • productivity – 400 l / hour;
  • power consumption – 4 W;
  • designed for use in aquariums and colonies with a volume of from 50 to 400 liters;
  • the design allows you to connect the device to several containers at once, the total volume of which does not exceed the maximum usage tolerance;
  • there is a system for regulating the performance of each channel separately;
  • the greatest power head – 200 cm;
  • innovative nozzles that regulate the flow rate and bubble size are used;
  • A system of different placement has been developed: on anti-vibration feet, on the wall of a pedestal in a suspended state or on the wall of an aquarium.
Read more:  Silent Air Pump For Aquarium Do It Yourself

Such a model is fully equipped, namely it is attached to the hose in the aquarium and sprayers.

How To Soundproof Aquarium Inlet Pump

If we consider the design of the compress, it is directly reliable and durable. But from the point of view of cost, such a model is the leader among those proposed.

JBL Aerator Filters

The ProSilent line of aquarium equipment combines not only a device that enriches water with oxygen, but also an effective mechanical filtration system. Such models are designed for operation in aquariums from 40 to 600 liters and aquarium columns of various engine capacities.

How To Soundproof Aquarium Inlet Pump

Depending on the model, the noise limit is measured for the weakest at 20 dB and 30 dB for the most powerful. These are not the quietest water pumps, but still, their noise level is low enough not to create discomfort to the inhabitants of the apartment where he works. Also, the manufacturer warns that the noise level may increase over time due to lime deposits on the filter. But this problem is solved by replacing it.

All the above models are the best in the category of silent water pumps. But which one is better in a particular case depends on the properties and individual characteristics of your aquarium.

Silent air pump for aquarium: how to choose and install

Small-sized aquarium inlet pump – an essential accessory for keeping ornamental fish at home. His choice and proper installation will provide the necessary conditions for the life of aquatic fauna and flora. Manufacturers offer different types of water pumps, which means that there is a problem of choosing the optimal type of device. Let’s try to figure it out.

Why do you need a water pump in an aquarium?

The answer is obvious to everyone who has seen this device in operation: it increases the oxygen content in aquarium water. Water in a stationary state may eventually turn into a kind of swamp.

Remains of vital activity of small fish, grain of feed, dust, small debris, film on the surface, lack of oxygen can all lead to an unfavorable state of the aquatic environment.

And, as a result, to the disease, and in the worst case to the death of the inhabitants of the aquarium. The air pump, supplying air to the water, enriches it with oxygen, creates air and water flows. This process is called aeration, and such water pumps are sometimes called aerators. Simply put, this is an air pump.

Types of water pumps

Aquarium microinductive pumps are divided into two main groups according to their device: diaphragm and piston.

The first type of pump delivers air through the movement of special membranes that allow air flow only in one direction. Such an aquarium inlet pump consumes very little power and works with low noise.

The main disadvantage of this device is low power. Aerator is not suitable for large containers. However, for example, for a 150-liter home aquarium, a small membrane silent water pump will fit perfectly.

Another type of aquarium aerators – piston vodushnye pumps. From their name it follows that air is pushed out with the help of a piston. These aerators are more expensive, but their advantage is high performance and durability.

True, the noise level of piston vodoshnyh pumps is slightly higher than in devices of the first type. Such aerators are usually installed in large aquariums or columns.

Home aerators of both types are both powered by household electrical network, and from batteries. Each aerator kit includes a flexible hose from which pumped air comes out.

Frequent questions about aquarium maintenance:

How to clean the glass, read in this article.

Why professionals do not use the bottom filter?

Choice Questions

Aquarium equipment manufacturers produce a wide variety of low-noise aerators.

Schego water pumps

First of all, it should be noted the products of the German company Schego, which produces water pumps for home aquariums and columns of almost any capacity.

So, for a small 70-liter aquarium, a small-sized Schego Prima aerator with a capacity of 100 liters per hour and a power of 3 watts is suitable.

But for a decorative large-capacity water column, you can purchase a Schego W53M silent water pump with a capacity of 350 liters per hour and a power of 5 watts. It provides air to a depth of 5 meters.

Chinese Triton Aerator

One of the most common models of silent micro-air pumps. It has two aeration channels with a power of 2.9 W, which ensures reliable circulation of air and water in an aquarium with a capacity of up to 170 liters.

Equipment from Collar

Very convenient small-sized silent aerators are produced by the Ukrainian company Collar. The aPUMP water pump of this manufacturer is considered one of the most silent in the world. With a power of only 1.5 W, it provides reliable aeration of the aquatic environment in a 100-liter aquarium at a depth of 80 centimeters.

These examples show that when choosing a silent water pump, it is necessary to proceed from

  • the size of the aquarium
  • power consumption of the device,
  • as well as the required depth of air supply.

Many experienced aquarists, when choosing one or another water pump, proceed from the following calculation: the power of the aerator should be about 0.5 liters of air per hour per 1 liter of aquarium water.

Install the silent water pump correctly

Silent aquarium inlet pump is quite easy to install. The external aerator must be placed on the shelf or directly on the glass cover of the aquarium so that the length of the hose allows for aeration from the bottom up.

That is, the end of the spray hose (if any) was as close as possible to the bottom of the tank. Sprayer is advised to use to ensure that air bubbles are as small as possible. In this case, the process of enriching the aquatic environment with oxygen is more intensive.

Some models of the home silent air pump for the aquarium are equipped with suction cups. This is very convenient, as the aerator can be securely attached directly to the glass wall of the fish house. Of course, you must have a nearby power source (sockets).

How to use aquarium water pump?

There are several opinions when it is necessary to conduct aeration of water. For some aquarists, the silent water pump runs continuously without shutting down. Although the power consumption of the aerator is quite small, many owners of ornamental fish use the device on schedule: 2 hours of work, 2 hours break.

After feeding the fish, it is recommended to always turn on the water pump.

It is also advised to conduct aeration of water at night, with minimal illumination.

The choice of silent air pumps for aquariums is quite wide, and it is quite possible to purchase the most silent aerator. In this case, a quiet life will be ensured for both the fish and their owners.

Video review of membrane aquarium water pump from Schego Optimal:

7 best aquarium air pumps – Rating (Top 7)

What do fish breathe in the aquarium: choose the right water pump

By Anna Sapelkina

Underwater, fish and plants also breathe oxygen, as do terrestrial living organisms. Without this gas, there is no way, no matter if you live on land or in the deep sea.

In natural water bodies, oxygen is produced by plants (during the day, during photosynthesis, they produce oxygen, but at night, during rest, they absorb it with the release of carbon dioxide) and gradually dissolve from the air, and the water layers are mixed. But in a closed system of small volume, which is an aquarium, this happens to a lesser extent. Moreover, the gas dissolves very poorly in warm water. The way out is the acquisition of a water pump, which incessantly supplies oxygen, passing bubbles through the water column.

Water pumps for aquariums can be piston and vibration, internal and external, autonomous (on batteries) and electric. But even the smallest aquarium needs a water pump.